Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant-Dry Lubricant-产品-Dry Lubricant And Oil Additives Suppliers
Categories

Dry Lubricant

Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant
  • Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant
  • Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant

Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant

PTFE is the solid friction material with the lowest friction coefficient. The C-C primary bond is completely wrapped by F atoms to form a complete cylinder. This rod-shaped molecule has very little attraction between the molecules and easy to slide between molecules, thereby forming a transfer film on the surface of the friction couple.
Product Name:Poly(tetrafluoroethylene),PTFE,Teflon
Molecular weight 10000-30000
CAS:9002-84-0
MF:(C2F4)n.
Send Inquiry
Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant introduce:

Description of PTFE

Poly(tetrafluoroethylene) (PTFE) has a strip structure in which crystal flakes and non-crystalline flakes are alternately arranged, and the non-crystalline portion is easy to slide, so the friction coefficient is small, and it is spaced between the friction pairs so that it has excellent anti-friction resistance. The grinding characteristics, therefore, PTFE can be used as a typical solid lubricating material, showing excellent performance in terms of heat resistance, wear resistance, self-lubricity, and low friction factor. Because PTFE is different from inorganic solid lubricants, PTFE is an organic polymer that does not form branches in the polymer. Its molecular contour is smooth, which makes it have a low coefficient of friction and can form a transfer on the dual surface during sliding. Membrane, therefore, the wear resistance of PTFE-based solid lubricant coatings is 5-7 times higher than that of MoS2 and graphite solid lubricant coatings.

CAS:9002-84-0


Parameters of PTFE

Item

Specification

Appearance

white fine powder 

Moisture content

≤ 0.03
Average particle size

D50 ≤10μm,

D90 ≤3μm 

Molecular weight10000-30000
Melting point 327±5
Decomposition temperature 430

Melt viscosity

102-106Pa•S 


Physical Data of PTFE

Chemical formula-(CF2-CF2)n-
Molecular weight100.015612
EINECS204-126-9
Melting point327℃
Boiling point400℃
Water solubleInsoluble in any solvent
Density2200kg/m3
Storage method
Airtight at room temperature, avoid light, ventilated and dry place


Application of PTFE

PTFE as an engine oil additive can be added to the grease to effectively improve the anti-wear and anti-friction properties of the grease, enhance the aging properties of the grease, and enhance the high-temperature performance of the grease and form a friction polymer film. Adding PTFE lubricants, greases, and lubricants can lubricate the oil film under low speed, high temperature, and high load conditions. PTFE is also widely used in other lubrication applications. PTFE is blended with a variety of other engineering plastics to provide a solid material with excellent lubricity.


Storage Conditions of  PTFE

1) Store in a dry environment at room temperature.
2) Avoid damp and high temperature.


Packing & Shipping of PTFE
We have many different kinds of packing which depends on the PTFE powder quantity.
PTFE powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
PTFE powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.




Hot Tags: Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant, manufacturers, suppliers, factory, Customized
  • MSITE CODEhttps://m.infomak.com/